The webs top source for New Security Cameras, Surveillance Systems, and Hi-Def IP Systems

Call 855.340.9999
For tech support or general inquiries: customerservice@nellyssecurity.com
For sales questions or sales inquiries: sales@nellyssecurity.com
Nelly's Surplus, Video Survellance Systems - Install, Claremore, OK
Call 855.340.9999
For tech support or general inquiries: customerservice@nellyssecurity.com
For sales questions or sales inquiries: sales@nellyssecurity.com
customerservice@nellyssecurity.com

Misc Items

10 Item(s)

Set Descending Direction
per page

List  Grid 

  • IPCamPower IPCP-MINIINJECTOR-AT Mini POE Injector Wall Wart Plug | 802.3at Full 30 Watts | Designed for IP Cameras
    6 Month Warranty

    IPCamPower IPCP-MINIINJECTOR-AT Mini POE Injector Wall Wart Plug | 802.3at Full 30 Watts | Designed for IP Cameras

    • Good - Some marks and scratches


    • POE INJECTOR IN COMPACT WALL PLUG DESIGN - Designed like a typical wall wart. Plugs directly into any USA style plug
    • SMALL FOOTPRINT LOW PROFILE DESIGN - Reduce the amount of wiring and footprint that normally comes associated with other POE Injectors
    • 30 WATTS OF POWER at 48V 802.3at - This will power any IP camera that accepts POE power. Most IP cameras require 15 watts or less with the exception of some PTZ's. In most circumstances, this will be more than enough power for your cameras
    • POWER YOUR IP CAMERAS, IP PHONES OR ANYTHING ELSE THAT TAKES 802.3at STANDARD POE POWER - Even though this was designed for IP camera installations, you can still use it for a multitude of any other devices that take standard POE power.
    • ECONOMICAL PRICE POINT WITH PROFESSIONAL PERFORMANCE - IPCamPower products are built to last. This device is no different. Its simple, cost effective, and reliable.


    View Product
  • 2GIG "Smoke Ring" Smoke Detector Sensor (2GIG-SDS1-345)
    6 Month Warranty

    2GIG "Smoke Ring" Smoke Detector Sensor (2GIG-SDS1-345)

    • Great - A few scratches


    • Smoke Detector Sensor (a.k.a. “2GIG Smoke Ring”)
    • Installs in between wall and existing hardwired smoke detector
    • Converts hardwired interconnected smoke detector systems to work with wireless alarm panels
    • Backup battery to send alarm transmissions in the event of power failure
    • Easy to see device status indicators


    View Product
  • VIVO Black 250ft Bulk Cat5e, CCA Ethernet Cable, UTP Pull Box | Cat-5e Wire, Waterproof, Outdoor, Direct Burial
    6 Month Warranty

    Black 250ft Bulk Cat5e, CCA Ethernet Cable, UTP Pull Box | Cat-5e Wire, Waterproof, Outdoor, Direct Burial

    • Great - A few scratches
    • CABLE TYPE - Cat5e bulk ethernet cable, 250ft roll, connector free
    • MATERIAL - Solid CCA (Copper Clad Aluminum) 24 AWG, Waterproof Shielding. Gigabit Network Ready (NOT UV rated)
    • SOLID UTP - (4-pair unshielded twisted pair) wires for economic use
    • EASY SPOOL BOX - Ideal for network installation. Applications include direct burial, outdoors, and other environments where the cable may need a waterproof shield, but NOT meant for direct sunlight
    • COLOR - Outside jacket comes in a black finish
    View Product
  • Alarm.com Smart Thermostat Unlisted Amazon Returns. Possibly tied to accounts (x5)
    6 Month Warranty

    Alarm.com Smart Thermostat Unlisted Amazon Returns. Possibly tied to accounts (x5)

    • Untested Amazon Returns. Possibly tied to accounts


    • Intelligently Connected with Alarm.com (Alarm.com account required)
    • Remote Access and Control
    • Custom Schedules
    • Critical Temperature Alerts and Geo-Services Automation.


    View Product
  • 2GIG-LTEV1-NET-GC2 4G LTE SecureNet Cellular Radio Card for GC2 Panels
    6 Month Warranty

    2GIG-LTEV1-NET-GC2 4G LTE SecureNet Cellular Radio Card for GC2 Panels

    • Like new


    • 4G LTE Category 1 (CAT1) cellular module
    • Works with Verizon Network
    • Compatible with SecureNet
    • US Only
    • GC2 Requires FW v1.19.1 or newer
    • Includes 2 LTE Antennas in the box with the radio


    View Product
  • 2GIG Wireless Secondary Security Touchscreen for GC3 Panels w/ Arm/Disarm Only Capabilities (2GIG-SP2-GC3)
    6 Month Warranty

    2GIG Wireless Secondary Security Touchscreen for GC3 Panels w/ Arm/Disarm Only Capabilities (2GIG-SP2-GC3)

    • Great- is branded


    • Connects using WiFi or GC3 Access Point
    • One-touch arming
    • At-a-glance system status
    • Chime for open sensor
    • Bypass open zones
    • Firmware updates: Over-the-air / USB
    • 7" Color Touch Screen


    View Product
  • 2GIG eSeries GC2e Security Alarm & Home Automation Control Panel (2GIG-GC2E-345)
    6 Month Warranty

    2GIG eSeries GC2e Security Alarm & Home Automation Control Panel (2GIG-GC2E-345)

    • Good - Some marks and scratches


      • No transformer included!!


      • Color touchscreen display
      • Compatible with 2GIG encrypted sensors
      • 60 Wireless zones
      • 1 Hardwired zone
      • 64 User codes
      • Fully self contained
      • Optional cell radio module
      • Optional POTS module
      • Remotely control panel settings over cellular
      • Two-way voice over POTS or cellular
      • Easily updateable for new features
      • Built-in Z-Wave Plus home control
      • Weather information display (with cell radio)
      • DC power receptacle
      • Quick arm/exit
      • ETL listed to UL 985, UL 1023, UL 1635, UL 1610, ULC C1023, and ULC-S545-02
      • ANSI/SIA CP-01-2010 and CSFM listed


      View Product
  • H Series 116SN/P 16 Channel NVR w/ Built In 8 Port POE Switch
    6 Month Warranty

    H Series 116SN/P 16 Channel NVR w/ Built In 8 Port POE Switch

    • Good - Some marks and scratches


    • 16 Channel NVR W/ 8 Port Plug n Play POE switch
    • Easily records Hikvision cameras up to 2MP (1080p)
    • 100 Mbps Maximum Throughput
    • Sleek Slim-Line style NVR
    • Holds One hard drive up to 4 TB
    • Also supports 3rd party Onvif Cameras (up to 2MP)


    View Product
  • IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget
    6 Month Warranty

    IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget

    • Good - Some marks and scratches


    • 48 POE PORTS W/ 3 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 51 Port switch in total. (48) 10/100 POE Rated Ports Designed for your IP Cameras or other POE Devices. (3) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffic from your cameras to run to your NVR/Server and/or Router.
    • 3 TOTAL COMBINED GIGABIT 10/100/1000 UPLINKS - Uplink Port 1 is an Ethernet Port. Uplink Ports 2 & 3 are Ethernet/SFP FIber Combo Ports meaning you can choose to use either the Ethernet port or the Fiber Port for each of these uplinks. Note you can only use 3 uplink ports at one time.
    • TOTAL POE WATTAGE BUDGET OF 400 WATTS - This is normally more than enough wattage to push atleast 48 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 400 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
    • EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
    • RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well. Dimensions are 17.25" x 11.5" x 1.75"


    View Product
  • IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget
    6 Month Warranty

    IPCamPower 48 Port POE Network Switch W/ 3 Gigabit Uplink Ports | Designed for IP Cameras | POE+ Capable of Pushing 30 Watts per Port | 400 Watts Total Budget

    • Like new


    • 48 POE PORTS W/ 3 ADDITIONAL NON POWERED GIGABIT RATED PORTS - This unmanaged POE switch is actually a 51 Port switch in total. (48) 10/100 POE Rated Ports Designed for your IP Cameras or other POE Devices. (3) Additional Non Powered Gigabit Rated Uplink Ports for fast and smooth transfer of all combined network traffic from your cameras to run to your NVR/Server and/or Router.
    • 3 TOTAL COMBINED GIGABIT 10/100/1000 UPLINKS - Uplink Port 1 is an Ethernet Port. Uplink Ports 2 & 3 are Ethernet/SFP FIber Combo Ports meaning you can choose to use either the Ethernet port or the Fiber Port for each of these uplinks. Note you can only use 3 uplink ports at one time.
    • TOTAL POE WATTAGE BUDGET OF 400 WATTS - This is normally more than enough wattage to push atleast 48 IP cameras with a mixture of both POE+ (IEEE802.3at) and Standard POE (IEEE802.3af) devices. As long as the combined maximum wattage from all your devices does not exceed a total of 400 watts, this device works perfectly. This will be more than enough wattage to fit the majority of scenarios.
    • EACH PORT CAPABLE OF PUSHING POE+ UP TO 30 WATTS PER PORT FOR POWER HUNGRY DEVICES - If you have cameras or devices that require abnormally high wattage, such as a PTZ for example, this switch has the ability to push up to 30 watts (POE+ IEEE802.3af/at) per port for devices such as this. Of course it also works just fine on any device that requires lower wattage POE Power as well as the switch will only push the amount of power that the device needs.
    • RACK MOUNTABLE WITH INCLUDED RACK EAR MOUNTS - Includes all the hardware needed to mount to your server rack. However, since the unit is so small and quiet, you can easily just use it in a desk mount scenario as well. Dimensions are 17.25" x 11.5" x 1.75"


    View Product

10 Item(s)

Set Descending Direction
per page

List  Grid 

  Loading...